Rena Ware UCU-500 EXTREME Uso Y Mantenimiento página 15

c. Insert the Mixed Water "Out" line (6A) into the plastic connector (6B), then insert the
inlet tube (6C) into the other end of the plastic connector (6B). Insert the outlet tube
(6D) into the brass connector on the Pullout Hose (6E).
NOTE: DO NOT USE PTFE TAPE ON THESE NON-THREADED CONNECTIONS.
6E
6D
6A
6B
6C
Note: When connecting 6A and
6C to 6B, or 6D to 6E, be sure
the tubing is completely seated; a
small band of gray tape indicates
proper tube depth. This should
require only a moderate amount
of force.
EN
15