Rena Ware UCU-500 EXTREME Uso Y Mantenimiento página 26

b. Thread your existing cold water supply line that comes from the valve on the wall into
the side inlet of the 3-way-diverter valve.
c. Thread the Braided Source Water Tube onto the bottom of the 3-way-diverter valve.
Braided water source tube
d. Remove the washer that is attached to the
smaller end of the Braided Source Water
Tube and place it in the small end of the
tube, then thread the small end of the tube
onto the Source Water Inlet of the LX-500s
Extreme.
26
Line to your wall
outlet
To the LX-500s
Extreme
Braided water
source tube