Intended Use - Festool UCR 1000 Instrucciones De Montaje

1

Intended use

The Universalcenter (UCR 1000) and the multifunc-
tion stool (MFH 1000) are designed for use in en-
closed, non-living areas.
Together with the Workcenter (WCR 1000), the Uni-
versalcenter forms a mobile workshop trolley for
placing, storing and transporting tools and con-
sumables.
The multifunction stool is used as a mobile seat in
combination with the seat cushion (MFH-SK).
For reasons of safety, the arbitrary conver-
sion and/or modification of the product is not
permitted.
The user is liable for improper or non-in-
tended use.
2 Symbols
Warning of general danger
Manual, read the instructions
Climbing prohibited
3 Safety instructions
Warning! Read and observe all information
and safety instructions. Ignoring warning
notes and instructions may result in serious
injuries.
Keep all safety information and other instructions
in a safe place for future reference.
– This device can be used by persons with reduced
physical, sensory or mental abilities or those
who lack experience or knowledge, if they are su-
pervised or have been instructed on safe use of
the device and understand the resulting dangers.
Children should always be supervised to ensure
that they do not play with the machine.
– Do not use the trolley on sloping or uneven sur-
faces, otherwise it may tip over or roll away and
cause personal injury or damage to property.
– Always use the trolley on a clean, smooth and
stable surface. Sharp-edged, pointed foreign ob-
jects and fibres (e.g. from cleaning cloths) can
damage the rollers or cause them to seize up.
Check the rollers for jammed foreign objects be-
fore rolling the trolley or using it at another loca-
tion.
– Do not overload the base frame and never use it
as a ladder or trestle. Observe the permitted
maximum weight (Fig.: [2] + [3]). Overloading or
standing on the trolley can cause accidents.
When placing objects on the storage surfaces of
the trolley that do not distribute weight evenly
due to their profile, always use an additional sup-
port such as a solid board or panel made from
appropriate material.
4 Assembly
Assembly
Main body
Mounted on MFH 1000
Mounted on UCR 1000
 To upgrade an existing Workcenter WCR 1000
with serial number smaller than 10102312 it is
necessary to order the base plate 35000318.
5 Environment
Do not dispose of the device together with domes-
tic waste! Dispose of machines, accessories and
packaging at an environmentally responsible recy-
cling centre. Observe the valid national regulations.
Information on REACh: www.festool.com/reach
UCR 1000 / MFH 1000
GB
Diagram
[1]
[2]
[3]
7