Pin Assignment - Sony LMD-150MD Instrucciones De Uso

Specifications
General
Power requirement
0.6 to 0.4 A
100 to 240 V AC, 50/60 Hz
Approx. 393 × 338 × 119.5 mm
Dimensions
(w/h/d) (15
inches)
(when the stand is installed:
approx. 393 × 432 × 244 mm
(15
Mass Approx. 5.5 kg (12 lb 2 oz)
(When the stand is installed:
approx. 7.6 kg (16 lb 12 oz))
Operating conditions
Temperature: 0 to +40°C
(32 to 104°F)
Humidity: 30 to 85 %
(no condensation)
Pressure: 700 to 1,060 hPa
Transport and storage conditions
Temperature: –10 to +40°C
(14 to 104°F)
Humidity: 0 to 90 %
(no condensation)
Pressure: 700 to 1,060 hPa
Accessories supplied
AC power cord (1)
Warranty Card (1)
AC plug holder (2)
Instructions for Use (1)
Optional accessories
Monitor stand SU-557
14
(GB)
× 13 × 4
1 3 3
/ / /
2 8 4
× 17 × 9
1 1 5
/ / / inches))
2 8 8
Classification of equipment
– Evaluated to EN60601-1, EN60601-1-2, UL2601-1
(Second Edition), CSA601.1
– Type of protection against electric shock
Class I equipment
– Degree of protection against harmful ingress of water
IPX1* Equipment
– Degree of safety of application in the presence of a
flammable anaesthetic mixture
Not protected equipment
– Mode of operation Continuous operation
– Information concerning type and frequency of technical
maintenance Not need maintenance equipment
* The monitor has been approved on condition of tilt angle
0° to 30°.
Design and specifications are subject to change
without notice.

Pin assignment

Computer input terminal (HD D-sub 15-pin, female)
Pin No. Signal
1 Red, R
2 Green, G
3 Blue, B
4 Ground
5 Ground
6 Ground (R)
7 Ground (G)
8 Ground (B)
Pin No. Signal
9 N.C
10 Ground
11 Ground
12 N.C
13 HD/C. Sync
14 VD
15 N.C