BEMIS 535010 Manual Del Usario página 2

INSTRUCTIONS FOR USE: MANIFOLD ONLY
1. Clip manifold to canister stand.
2. Attach tubing connectors of manifold to the vacuum port of canisters.
3. Attach patient tube to the patient port of any of the four canisters in the system.
4. Cap tandem and pour spout of all canisters.
5. Attach vacuum source to vacuum port of manifold.
6. Open stopcock to first canister.
7. When first canister is full, move patient tubing to second canister and open stopcock to second canister.
8. Repeat until all canisters are full.
To replace full canister, close stopcock, disconnect manifold and cap all ports before moving. Replace with new
canister, set up as before.
P = PATIENT
V = VACUUM
T = TANDEM
S = POUR SPOUT
P
T
OFF
POSITION
(CLOSED)
6
2
T
S
V
S
V
P
P
TO VACUUM
V
MANIFOLD
VACUUM PORT
S
V
1
S
T
7
SOURCE
T
P
CANISTER TO PATIENT
ST
ON
POSITION
(OPEN)