DHP 3136096 Manual Del Usuario página 7

1
Attach two POST LINKS (M) to the POST RAIL (O) with four SCREWS (4). Assemble POST LINK (M) to REAR POST 1 (A) and
FRONT POST 2 (D) with the SCREWS (4) as shown in DETAIL (1). Attach the SIDE SAFETY RAIL (H) to the REAR POST 1 (A)
and the FRONT POST 2 (D) with the BOLTS (2) as shown in DETAIL (2).
Repeat to attach the remaining POST RAIL (O) to the REAR POST 2 (B) and FRONT POST 1 (C).
Hardware Required
2
4
x16
x8
4
M
A
DETAIL (1)
O
4
M
O
A
7 /15
NOTE: Warning label on the post (O)
must be at the same side of the bolt
holes on the post (D).
D
H
D
H
2
DETAIL (2)
B34313609605