1. Introduction
• The pizza stone is made from durable Cordierite and can withstand temperatures up to 300°C.
• The CADAC pizza stone can be used on a wide variety of appliances, including gas and electric.
2. Using the Pizza Stone
• It is recommended to use the pizza stone in conjunction with the wire tray supplied. This will protect the stone as well as assist with
handling.
• Please note that not all our pizza stones are supplied with a wire tray. Please see below images or refer to the packaging for items
included.
• Please note, these are only guidelines and may differ by product.
Instructions:
• Place the pizza stone in BBQ.
• Pre-heat on Maximum with the dome on (3-5 minutes).
• Once pre-heated, sprinkle cake fl our on the pizza stone. This will assist in preventing the crust from burning and sticking to the stone.
• Immediately, set the burner to LOW.
• Place pizza centrally on the pizza stone.
• Wait approximately 8 – 10 minutes. Times may vary.
• When pizza is done, remove from BBQ. Be careful as the wire tray will be hot. The use of oven gloves is recommended.
• Remove the pizza and leave the pizza stone to cool down gradually.
CHEF RANGE
PIZZA STONE 33cm
• Product code: 98368
• Size: Ø33cm x 1cm thick
• Can fi t onto the following CADAC products:
•
Grillo Chef 2 (Model: 5650)
•
Grillo Chef (Model: 5600)
•
Citi Chef 40 (Model: 5610)
•
Grillogas (Model: 740)
PIZZA STONE 42cm
• Product code: 98331
• Size: Ø42cm x 1.5cm thick
• Can fi t onto the following products:
•
Electric ovens
•
Patio gas bbq's
•
Carri Chef 2 (Model: 8910)
PIZZA STONE 25cm
• Product code: 6544-100
• Size: Ø25cm x 1.2cm thick
• Can fi t onto the following CADAC products:
•
Safari Chef 2 (Model: 5640)
• Do not use the wire holder with the pizza
• Place the pizza stone directly onto the
1 1
Using pizza stone 98331 on the Carri
Chef 2 (Model: 8910)
stone, the dome will not fi t.
pot stand.
GB