Kohler K-1000-H2 Guia De Instalacion página 2

16-1/8"
(41cm)
60"
(152.4cm)
FASCIA FRONT
FOR CUSTOM TOWER PUMP KIT 18-5/8"
(47.3cm) UP FROM SUB-FLOOR. (ALLOW
FOR VERTICAL ADJUSTMENT)
Product Information
Accessories/hardware:
Alcove footbath, LH
Alcove footbath, RH
Corner footbath
Alcove enclosure
Corner enclosure
*Custom tower pump
*Custom drain
*For custom component installation.
Fixture:
Weight
1030202-1-A
*3/8" (1cm) D. HOLE
(DRILL FIRST)
*KEYPAD
58" (147.3cm) TO
60" (152.4cm)
FROM FLOOR OF
BATH
2-3/8" (6cm) UP FROM
BACK OF SEAT DECK
SURFACE
K-1015-H2 required
K-1016-H2
K-1005-H2
K-5161-L required
K-5162-L
K-1001-H2 required
K-7179 recommended
50 lbs. (23kg)
12" (30.5cm)
STUD OPENING
*1-5/8" (4.1cm)
D. HOLE
3-1/4"
(8.3cm)
14-1/4"
(36.2cm) BOX
Notes
Refer to the installation instructions included with this fixture
before beginning installation.
Locate the keypad within reach of the control box. An 8' (2.4m)
cable is included.
Installation employing the K-5161-L alcove enclosure or the
K-5162-L corner enclosure are not designed for steam applications.
The unit may not perform satisfactorily as a steam unit.
*When installing the keyhole for the keypad, drill a 3/8" (1cm)
diameter hole first at the top of the location. Then drill the 1-5/8"
(4.1cm) hole.
Blind installations on the backside require a 1-7/8" (4.8cm) to
2-1/2" (6.4cm) diameter hole for the keypad nut.
2
11-7/8"
(30.2cm)
62-3/4"
(159.4cm)
BOX
ATTACHES TO
PLUMBING
FROM PUMP
MUST LINE UP WITH L OF
PLUMBING FROM PUMP
C
Kohler Co.