Speed Adjustment - Elite PS350 Manual De Usuario

SPEED ADJUSTMENT

To run the sander at a medium speed, set the Speed Control Wheel (3) to #3
To run the sander at its slowest speed, rotate the Speed Control Wheel to #1.
To run the sander at higher speeds, rotate the Speed Control Wheel to a higher number on the wheel.
The sander will be running at its maximum speed when the Speed Control Wheel is set at "MAX".
It is usually better to use the sander at its maximum speed setting. Faster speeds will remove material
faster and produce a smoother finish. However, when using the sander to remove paint or varnish, using
slower sander speeds will lower the risk of the material being removed heating up and plugging up the
sandpaper.
CLEANING & MAINTENANCE
GENERAL INSPECTION
Regularly check that all the screws are tight as they may vibrate and loosen over time.
Inspect the Power Cable prior to each use for damage or wear.
Repairs should only be carried out by a qualified technician.
Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly and shorten the
tool's service life. Clean the body of the tool with a soft brush or dry cloth.
We recommend using compressed air when possible to clean down the Sander. This aid with product
longevity.
11
www.ELITETOOLS.co
Keep Working