Elite PS350 Manual De Usuario página 29

CAUTION: Never use caustic agents to clean plastic parts. If dry cleaning is not sufficient, using a mild
detergent on a damp cloth is recommended.
WARNING! Do not allow the tool to come into contact with water or any other liquid.
Ensure the tool is thoroughly dry before using it.
If available, use clean, dry, compressed air to blow through the ventilation holes (where applicable).
Hook and Loop surfaces need to be clean, free of dirt and foreign matter (hair, sand etc.) and in good con-
dition to provide adequate adhesion for securing accessories.
When used extensively, Hooks and Loops will become elongated or broken, and the mechanism will be
unable to provide the required strength of adhesion.
Troubleshooting
12
www.ELITETOOLS.co
Keep Working