Safety Alert Symbol; Specific Safety Rules - Craftsman BOLT ON 34980 Manual Del Operador

fOR ONe yeAR from the date of purchase, this product is warranted against
defects in material or workmanship. With proof of purchase, a defective product will
be replaced free of charge.
for warranty coverage details to obtain free replacement, visit the web site:
www.craftsman.com
This warranty does not cover the blade and sand paper, which are expendable parts
that can wear out from normal use within the warranty period.
This warranty is void if this product is ever used while providing commercial
services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Sears Brands Management corporation, Hoffman estates, Il 60179
SyMBOl SIGNAl MeANING

SAfeTy AleRT SyMBOl:

May be used in conjunction with other symbols or pictographs.
DANGeR:
Indicates hazardous situation which, if not avoided, will result in death or serious injury.
WARNING:
Indicates hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION:
Indicates a haz ard ous situation which, if not avoided, could result in minor or
mod er ate injury or property damage.
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
WARNING:
Read all safety warnings and all instructions provided with your
Power Unit (16496 or 35592) before using this attachment. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.

SPecIfIc SAfeTy RUleS

• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric shock.
• Use clamps or another practical way to secure and support the workpiece to a stable platform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• Disconnect power before using tool near live wires or where there may be hidden wiring.
Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock." Always check for hidden wiring, gas lines, or other utilities
before performing any material cutting or removal operations with the tool.
• Wait for the cutter to stop before setting the tool down. An exposed cutter may engage the
surface leading to possible loss of control and serious injury.
• Do not operate this tool for long periods of time. Vibration caused by the operating action of
this tool may cause permanent injury to fingers, hands, and arms. Use gloves to provide extra
cushion, take frequent rest periods, and limit daily time of use.
• Always hold the tool firmly with both hands for maximum control. Keep proper footing and
balance at all times. This enables better control of the power tool in unexpected situations.
• Do not restart the cutting operation in the workpiece. Let the tool reach full speed and carefully
re-enter the cut.
cRAfTSMAN ONe yeAR lIMITeD WARRANTy
Indicates
DANGeR, WARNING, OR cAUTION.
2