Publicidad
• On the left side, insert a 5/16" x 3-1/2" hex bolt (14)
through the upper hole on the transport tube (10), a
spacer (42), and the hitch tube. Secure with a 5/16
nylock nut (27). Do not tighten yet. See figure 4.
14
10
fIGURE 4
• Fasten the hitch tubes together using three 5/16" x
2-1/2" hex bolts (15) and 5/16" nylock hex nuts (27). Do
not tighten yet. See figure 5.
27
27
27
fIGURE 5
27
42
15
15
15
7
• Attach the hitch brackets (13) to the hitch tubes using
two 5/16" x 2" hex bolts (17) and 5/16" nylock hex nuts
(27). Do not tighten yet. See figure 6.
• Install the hitch pin (21) through the hitch brackets
(13), and secure with a 3/32 hair cotter pin (25).
Tighten all loose bolts and nuts that have been
•
assembled.
fIGURE 6
• Assemble a 1/2" x 4" hex bolt (16), a .531 washer (34),
a wheel (6), a .531 washer (34), and a .5" jam nut (29).
finger tighten only.
• Attach the wheel assembly to the transport tube using
a 1/2" nylock jam nut (28). Repeat for the other side. See
figure 7.
6
16
34
fIGURE 7
17
21
13
13
27
25
34
28
29
Publicidad
