Axxess AXBUCH-MI6V Instrucciones De Instalación

Descargar este manual

Installation Instructions for AXBUCH-MI6V

Mitsubishi Backup Camera Retain/Add-On

• Retains the factory backup camera to an aftermarket radio

• Allows an aftermarket camera to be added to the factory screen

• AXBUCH-MI6V harness • AXCSD-6V 12-volt to 6-volt converter

CAUTION!

All accessories, switches, climate controls panels, and especially air bag indicator lights

must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

Axxess Integrate

REV. 1/28/20

AXBUCH-MI6V

INTERFACE FEATURES

• Includes the AXCSD-6V 12-volt to 6-volt converter

INTERFACE COMPONENTS

MITSUBISHI

Lancer

Lancer Sportback

Outlander

Outlander Sport

TOOLS REQUIRED

• Wire cutter • Crimping tool • Solder gun • Tape

• Connectors (example: butt connectors, bell caps, etc.)

2014-Up

APPLICATIONS

axxessinterfaces.com • metraonline.com

2014-Up

Página 1 • Retains the factory backup camera to an aftermarket radio • Allows an aftermarket camera to be added to the factory screen • Includes the AXCSD-6V 12-volt to 6-volt converter INTERFACE COMPONENTS • AXBUCH-MI6V harness • AXCSD-6V 12-volt to 6-volt converter APPLICATIONS MITSUBISHI Lancer...
Página 2 Installation Instructions for AXBUCH-MI6V Connections to be made The AXBUCH-MI6V can be connected two different ways To retain the factory backup camera to an aftermarket radio: • Connect the Black wire to chassis ground, and also to the Black wire of the AXCSD-6V.
Página 3 • Permite que se añada una cámara de mercado secundario a la pantalla de equipo original • Incluye el AXCSD-6V de 12 voltios al convertidor de 6 voltios COMPONENTES DE LA INTERFASE • Arnés AXBUCH-MI6V • AXCSD-6V 12 voltios al convertidor de 6 voltios APLICACIONES MITSUBISHI...
Página 4 Instrucciones de instalación para AXBUCH-MI6V Conexiones que se deben hacer El AXBUCH-MI6V puede conectarse de dos maneras distintas Para retener la cámara de reversa de fábrica para un radio de mercado secundario: • Conecte el cable negro a la tierra del chasis, y también para el cable negro del AXCSD-6V.