"Sensorsteam" Function; Steam Settings - Bosch Sensixx'x TDi90 Instrucciones De Uso

"i-Temp" programme
This programme sets an appropriate combination of temperature
and steam, which is suitable for all fabrics that can be ironed
(symbols ).
The "i-Temp" programme does not apply to fabrics that cannot
be ironed (symbol
Please check the garment care label for details or try ironing on
a part of the fabric not visible normally.
"AntiShine" programme *
AntiShine
Suitable for dark and delicate fabrics. Reduces the risk of shiny
marks when ironing.
Tip: Try to iron the fabrics while they are still damp after
washing. Steam will be generated from the fabrics rather than
the iron.
"Hygienic" programme *
Hygienic
Suitable for all kinds of fabrics and extremely eficient in both
thick and delicate garments.
The unique combination of temperature and interval steam
provides a sanitizing effect requiring no chemical additives.
Tip: To ensure the maximum eficiency of the "Hygienic"
programme, it is recommended to set the steam mode to "max"
(see section 5).

4. "SensorSteam" function

After the initial heating, "SensorSteam" function switches off the
iron when it is left unattended, thus increasing security and
saving energy.
While the handle is gripped, the iron heats up. The
1
"SensorSteam" indicator lamp (2) will remain lit continuously.
2 When the handle is released, the "SensorSteam" function is
activated. The "SensorSteam" indicator lamp (2) will lash.

5. Steam settings

This iron generates steam by means of a built-in motor. While
the motor is working, the "MotorSteam" indicator lamps (15) of
the water tank come on.
The iron is equipped with a sensor and an electronic system to
adapt the amount of steam to the mode of use, optimising both
the ironing and the service life of the appliance.
* Model dependent
).
17
B OS CH