After Ironing; Cleaning & Maintenance; Descaling Systems - Bosch Sensixx'x TDi90 Instrucciones De Uso

9. After ironing

Unplug the iron from the mains socket.
1
2 Empty the water tank.
3 Set the iron aside in a vertical position on its heel (15) to cool
down.
4 Coil the power cable (16) loosely around the heel of the iron.
Store the iron in an upright position.
Tip: For immediate storage of the iron, you may use the
"StoreProtect " accessory (see "Accessories" section).
Cleaning & Maintenance
E
Attention! Risk of burns!
Always unplug the appliance from the mains supply
before carrying out any cleaning or maintenance
operation on it.
1 If the iron is only slightly soiled, pull out the plug and allow
the soleplate (10) to cool down. Wipe the housing and the
soleplate with a damp cotton cloth only.
2 To keep the soleplate smooth, you should avoid hard contact
with metal objects. Never use a scouring pad or chemicals
to clean the soleplate.

Descaling systems

antiCalc
A "self-clean"
The "self-clean" ilter prevents motor from blocking.
B "anti-calc"
The "anti-calc" cartridge has been designed to reduce the
build-up of scale produced during steam ironing.
19
B OS CH