BH G880 Manual Del Usuario página 15

ANDROID
(compatible Android devices)
Download a Pafers App from Google
Play (Check compatible apps at the
BH website:
Then connect the USB Bluetooth
module (purchased separately) into
the USB port on the back of the
monitor (Fig. 7.) Turn Bluetooth to
"ON" in settings on the Android
device. Open the Pafers app to run it.
When prompted by the app, select the
appropriate BH Module from the list
displayed on the Android device to
pair.
TROUBLESHOOTING GUIDE.-
Problem: The display comes on but
only the Time function works.
Solution:
a.- Make sure that the connection
cable is connected.
Problem: Display segments of a
function read-out are not visible or
error messages
function appear.
Solution:
a.- Unplug it from the 220 V mains
OPERATION
www.bhfitness.com).
for a particular
socket for 15 seconds and then plug it
back in.
b.- If the above steps do not help then
replace the electronic monitor.
Transformer
Problem: The monitor does not switch
on.
Solution:
a.- Check the 220 V mains connection
b.- Check the output connection from
the transformer to the machine.
c.- Check the cable connections for
the main post.
Avoid leaving the electronic monitor in
direct sunlight as this might damage
the liquid crystal display. Similarly, do
not expose it to water or knocks.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
15