Leuze electronic OGS 600-CN-M12 Serie Manual Del Usuario página 19

NOTE
Shielding connection!
The shielding is connected via the M12 connector housing. Additional
shielding is not required for sensors with M12 connection.
NOTE
Protective Extra Low Voltage (PELV)!
The device is designed in accordance with protection class III for supply
with PELV (Protective Extra-Low Voltage).
NOTE
Further information on electrical connection, on configuration and on
commissioning can be found in the operating instructions beginning in
chapter 5.
Decommissioning, maintenance
CAUTION!
 Do not open the device yourself under any circumstances! The hous-
ing of the sensor contains no parts that need to be adjusted or main-
tained by the user. If faults cannot be cleared, the device should be
switched off and protected against accidental use.
 Package the device for transport and storage in such a way that is
protected against shock and humidity. Optimum protection is
achieved when using the original packaging. Ensure compliance with
the approved environmental conditions listed in the specifications.
 Do not use aggressive cleaning agents such as thinner or acetone
for cleaning the device.
NOTE
UL applications
1) For UL applications, use is only permitted in Class 2 circuits in accor-
dance with the NEC (National Electric Code)
2) Only permissible in NFPA 79 applications
3) Do not use outdoors
EN
19