Quick Start Guide - Nilfisk ALTO NEPTUNE 2 Instrucción Breve

certifi ed electrician.
According to IEC 60364-1 it is strongly rec-
ommended that the electric supply to this
machine should include a residual current
device (GFCI).
Extension cables
Inadequate extension cables can be danger-
ous. Cables on drums should always be com-
pletely unwinded to prevent the cable from
overheating. Extension cables should be of a
watertight construction and comply with the
below-mentioned requirements for length and
cable dimensions.
Cable length
< 16 A
up to 20 m 1.5 mm
20 to 50 m 2.5 mm
Cable connections should be kept dry and
off the ground.
During operation
High pressure jets can be dangerous. Ne-
ver direct the water jet at persons, pets, live
electrical equipment or the machine itself.
Never try to clean clothes or footwear on
yourself or other persons.
The operator and anyone in the immediate
vicinity of the site of cleaning should take
action to protect themselves from being
struck by debris dislodged during operation.
Wear goggles during operation.
Do not cover the machine during operation.
Never use the machine in an environment
where there could be a danger of explosion.
If any doubt arises, please contact the local
authorities.
It is not allowed to clean asbestos-
containing surfaces with high pressure.
This high pressure washer must not be
used at temperatures below 0°C.
Only use correct fuel as specifi ed. Improper
fuels can cause severe hazard.
Repair and maintenance
Always remove the electric plug from the
socket before carrying out maintenance work
on the machine.
6
Cross section
< 25 A
2.5 mm
2 2
4.0 mm
2 2
Safety devices
Locking device on spray gun:
The spray gun features a locking device. When
the pawl is activated, the spray gun cannot be
ope rated.
Thermal sensor:
A thermal sensor protects the motor against
overloading. The machine will restart after
a few minutes when the thermal sensor has
cooled.
Pressure safety device
An integrated hydraulic safety valve protects
the system from excessive pressure.
Thermal safety device:
A thermal safety device placed in the chim-
ney protects the machine from overheating.
The safety device must only be replaced by a
Nilfi sk-ALTO technician.
Guarantee
Our general conditions
ble with regard to the guarantee.
Unauthorised modifi cations to the appliance,
the use of incorrect accessories, spare parts
and cleaning chemicals in addition to using the
appliance in a way other than for the intended
purpose exempt the manufacturer from any
liability for the resulting damage.
Recycling the washer
Make the old cleaner unusable immediately.
1. Unplug the cleaner
2. Cut the electric cable.
3. Do not discard electrical appliances with
household waste.
As specifi ed in European Directive
2002/96/EC on old electrical and
electronic appliances, used electrical
goods must be collected separately
and recycled ecologically. Contact
your local authorities or your nearest
dealer for further information.

Quick start guide

Pages 2 – 4 feature a pictorial quick reference
guide, which is designed to help you when
starting up, operating and storing the appli-
ance. This quick start guide does not replace
the separate operating instructions, which
describes the appliance in detail. The opera ting
instructions also contain further information on
the operation, maintenance and repair of the
appliance.
of business are applica-