Mark Maddox MM6P25 Manual Del Usuario página 10

After setting the time, use a time signal to synchronize the watch by
pushing crown to the normal position to start the second hand
going.
Note:
NOTE:
* Make sure you have correctly set AM/PM before setting the time.
* When the day changes over, it is a.m. (Day changes over between
0:00 a.m. and 5:30 a.m. or little later)
D) SETTING THE DATE (BY QUICK OPERATION)
Pull the crown out to the 1st position. Turn the crown
counterclockwise to set the date quickly.
Note:
NOTE:
* Do not set the date between the hours 9:00 p.m. and 0:30 a.m.
The date may not change correctly the next day.
10