Maintenance - EGO CSX3000 Manual Del Usuario

MAINTENANCE

WARNING:
chain saw before inspecting, cleaning, or performing maintenance. A battery-operated
tool with the power plug inserted is always on and can start accidently.
WARNING:
other parts may create a hazard or cause product damage.
WARNING:
saw chain. Be careful of the saw chain and protect your hands from being injured by
the saw chain.
WARNING:
liquids.
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic, which may result in serious personal injury.
All chain saw service, other than the items listed in this manual, should be performed
by a qualified service technician.
CLEANING
◾
After each use, clean debris from the chain and guide bar with a soft brush. Wipe
the chain saw surface with a clean cloth moistened with a mild soap solution.
◾
For deep clearing, remove the side cover assembly, take down the guide bar and
saw chain and then use a soft brush to thoroughly remove debris from the guide
bar, saw chain, and the drive sprocket on the chain saw power head.
◾
Always clean out wood chips, saw dust, and dirt from the guide bar groove when
replacing the saw chain.
38
56V LITHIUM-ION CORDLESS CHAIN SAW — CSX3000/CSX3000-FC
To avoid serious personal injury, disconnect the power plug from the
When servicing, use only identical replacement parts. Use of any
Always wear heavy gloves when performing any maintenance on the
When cleaning the chain saw, DO NOT immerse it in water or other
Do not at any time let brake fluids, gasoline, petroleum-based