Cooking Table - Faber GALILEO SMART 600 NR Manual De Uso

Pause function
Recall function
Combo mode ("bridge"
function)
AUTO function
"A"

11. COOKING TABLE

Cooking method
Power level
Melting, heating gently
1
Melting, heating gently
2
Warming up
3
Prolonged cooking, thickening, stewing
4
Prolonged cooking, thickening, stewing
5
Prolonged cooking, braising
6
Light frying
7
Frying, deep fat frying
8
Quick frying at high temperature
9
Quick heating
P
12. SUCTION HOOD
FUNCTIONS
The controls for the cooking areas, suction hood and timer
can be activated by pressing on the reference Digit.
12
This function allows you to pause/restart any active function on the hob, by reducing the power
available in the cooking area and resetting all the functions. If the Pause function is not disabled
with 10 minutes, the hob automatically switches off.
To enable: With a pan on the hob and the cooking area selected, press and hold the Pause func-
tion key for at least 1 second. All the displays show
To disable: press and hold
seconds. The function is disabled and the hob continues with the previous settings.
This function is used to recall the function settings of the hob if it is switched off by mistake or the
electricity is unexpectedly cut off.
When the hob is switched off, if it is switched on again with 6 seconds by touching
key flashes for 6 seconds. Press the
ted to confirm the operation.
This function allows 2 cooking areas to be combined to use and control them as if they were one
and have a bigger cooking area at your disposal. This function allows you to use pans with a wider
base.
Only the cooking areas on the left and on the right can be selected for use with this function.
To enable/disable: press the digits of the left-hand or right-hand cooking areas at the same time to
select the 2 areas be combined until the
abled. The other digit is used to set the power level.
The standard setting when the hob/suction hood is switched on is for the hood to start up in auto-
matic mode with the LED "A" brightly lit. The Hood comes into operation if the power in the cooking
areas is greater than "1".
It is deactivated by pressing the LED "A" which changes intensity from bright to dim in confirmation.
It can also be deactivated by pressing a value, higher than "1", on the power bar, which is con-
firmed by the fact that the LED "A" changes intensity from bright to dim.
It is reactivated by pressing the LED "A" which changes to brightly lit.
for 1 second until it starts flashing. Press any other key within 10
key to recall the functions set previously. A beep is emit-
digit appears to show that the function has been en-
To be used for
Butter, chocolate, gelatine, sauces
Butter, chocolate, gelatine, sauces
Rice
Vegetables, potatoes, sauces, fruit, fish
Vegetables, potatoes, sauces, fruit, fish
Pasta, soups, braised meat
Rösti (potato fry-ups), omelettes, breaded and fried
foods, sausages
Meat, chips
Steak
Boiling water
Press " 9 " on the power bar to set INTENSIVE 1
" 9 "
speed. This setting is timed to operate for 10
minutes. Once this time has passed, the system
will automatically return to the speed set previ-
ously. It is deactivated by selecting a different
speed.
Press " 9 " on the power bar twice to set INTENS-
" P "
IVE 2 speed. This setting is timed to operate for 5
minutes. Once this time has passed, the system
will automatically return to the speed set previ-
ously. It is deactivated by selecting a different
speed.
.
, the