Operation/Utilisation/Operación - Tresanti ODP10555-48D908 Manual Del Usuario

Tabla de contenido

Publicidad

Control Panel/Panneau de commande/Panel de control
Lock Button:
Press this button to lock the touch-screen. This will prevent accidentally engaging the controls after the desired
height has been set. Press the button again to unlock the touch-screen.
To reset your desk to default settings, press and hold this button while simultaneously plugging in the power cord
until the control panel lights up.
To change between inches and centimeters, press and hold this Lock button for 5 seconds.
Silent Mode:
All operations are performed under this default mode.
Display:
The display will indicate the height of the desk (inches). After five seconds without input, the digital readout will
automatically fade away.
Touch and hold one of the memory buttons (H1-H4) for 3 seconds when the desk is at the desired height in order
to save it as a memory preset. The table will automatically return to the set height when the
corresponding memory button is touched.
Touch and hold the
The table is at the lowest height setting when "bot" is displayed.
Touch and hold the
The table is at the highest height setting when "top" is displayed.
USB Ports:
There are 3 USB ports suitable for charging devices with 2.4A charging power requirement (or lower).
The USB ports will pause charging temporarily when the height of the table is being adjusted and the motor is in
use.
B094
OPERATION/UTILISATION/OPERACIÓN
button to lower the table and release when it arrives at the desired height.
button to raise the table and release when it arrives at the desired height.
16
3 USB Ports(2.4A for each port)
Trois ports USB (2,4 A pour-
chaque port)
3 puertos USB(2.4 A para
cada puerto)
Lock Button
Bouton de verrouillage
Botón de bloqueo

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

307527

Tabla de contenido