Intended Use; Technical Data - Hilti TE 300-AVR Manual Del Usuario

3 Description
3.1 Overview of the product
TE­C or TE­T chuck
@
Function selector switch
;
Control switch lock
=
Control switch
%

3.2 Intended use

The product described is an electrically powered breaker. It is designed for
light chiseling work on masonry and surface finishing work on concrete.
▶ Operation is permissible only when connected to a power source
providing a voltage and frequency in compliance with the information
given on the type identification plate.
3.3 Active Vibration Reduction (AVR)
This product is equipped with an Active Vibration Reduction (AVR) system,
which reduces vibration significantly.
3.4 Items supplied
Breaker, operating instructions.
Other system products approved for use with this product can be found
at your local Hilti Store or at: www.hilti.group
4

Technical data

When powered by a generator or transformer, the generator or transformer's
power output must be at least twice the rated input power shown on the rating
plate of the power tool. The operating voltage of the transformer or generator
must always be within +5% and -15% of the rated voltage of the power tool.
The information given applies to a rated voltage of 120 V. The data may vary
in the event of deviations from the rated voltage and for country-specific
versions. Please refer to the power tool's type identification plate for details
of its voltage, frequency, current and input power ratings.
Weight
Single impact energy
*401137*
1
TE 300­AVR
8.4 lb
(3.8 kg)
3.3 J
401137
Grip
&
Supply cord
(
Front grip surface
)
English 7