Publicidad
Idiomas disponibles
Idiomas disponibles
When you see this
icon, find your vehicle
in the Joe Fit Sheet.
Find measurement,
strap locations, and
critical notes about
your fit.
If you cannot
find your car
in the Fit Sheet,
call 888-925-4621 in the USA
and Canada, or see your dealer.
ROTATE THE
SMALLER
FRAME.
PULL AND TURN
the red triggers
located in the hubs
of the carrier.
FIND YOUR
MEASUREMENT
IN THE FIT
SHEET.
Prepare "Joe".
x
Depress the
goldtoned
buttons in the
ends of the load
arms.
≠
Pull the arms straight down until
they can easily move upward.
z
Rotate the load arms up
completely.
• On a flat surface,
move the frames
apart until the
specified
measurment is
reached.
• Measure from the
inside edges of
the tubes.
Red
The smaller
Trigger —
rotating frame
should move freely
as the large support
frame remains
stationary.
'LOCK IN' THE FRAME MEASURMENT.
• Pull and turn-back the
red triggers.
• Move the frames apart
slightly until the red
triggers snap back into
the hub.
• The frames should
remain locked in place.
{
Push each arm
into the hub up to
the line on the
bar. The button
MUST snap into
the side holes.
Load arms
— Smaller rotating
frame
— Large support frame
Publicidad
