Replacing The Filters; Secondary Filter - Riccar Prima R50SS El Manual Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Brushroll Warning Lights
Tandem Air Power
Nozzle
*Model R50TAP only
The warning indicator lights in the
headlight lens will change to flashing
red. Should this occur:
• Turn off vacuum and unplug cord.
• Remove object preventing
brushroll from turning.
Full Size Power Nozzle
*Model R50FSN only
The warning indicator lights on top
of the unit will turn from green to
red. Should this occur:
• Turn off vacuum and unplug cord.
• Remove object preventing
brushroll from turning.
• Locate the circuit breaker switch
on the back of the power nozzle
and reset the breaker.

Replacing the Filters

HEPA Media Filter
01
Open the bag compartment lid and
locate the filter behind the vacuum
bag.
02
Grasp the tab with two fingers and
pull the filter out toward you.
03
Replace with a new filter by sliding
the filter in and pushing down on the
top of the tab until it clicks into place.
NOTE
Replace HEPA media and secondary
filters after using 12 vacuum bags.
Filters cannot be washed and reused.

Secondary Filter

01
Open the bag compartment lid and
locate the filter behind the vacuum
bag.
02
Pull the filter cartridge up and out of
the vacuum and discard.
03
Slide a new filter cartridge back into
place and replace the bag.
9

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Prima r50fsnPrima r50tap

Tabla de contenido