Bd Player (Bd-940); Front Panel Display - Yamaha MCR-940 Manual De Instrucciones

BD player (BD-940)

■ Front panel
1 Disc tray
Holds a disc to be played back.
2 p (play) indicator
Appears during playback.
3 REP OFF S ALL A-B indicator
Lights up when Repeat play mode is selected.
4
Opens and closes the disc tray.
When this button is pressed during standby mode, the
receiver automatically turns on and the input source
changes to DISC.
5
Stops playback (☞p.17).
6
(On/Standby)
Turns on the BD player or sets it to standby mode.
When this button is pressed during standby mode, the
receiver automatically turns on and the input source
changes to DISC.
y
If the BD player does not operate properly for some reason, you
can reboot it by holding down this button for about 10 seconds
and pressing it again.
7 QUICK indicator
Light up in standby mode when Quick Start function is on
(☞p.35).
Flashes after you connect the power cable to the AC wall
outlet until the BD player enters standby mode.
8 e (pause) indicator
Lights up while the BD player is paused.
1 2
MP3 WMA TRACK TOTAL REMAIN PROG RANDOM
QUICK
6 7 8 9

9 Front panel display

Shows the current status of the BD player.
0
Returns to the beginning of the current chapter or track.
Press and hold to fast reverse. Press twice to skip to the
previous chapter or track (☞p.18).
A
Starts or pauses playback (☞p.17).
When this button is pressed during standby mode, the
receiver automatically turns on and the input source
changes to DISC, whichever was last selected.
B
Skips to the next chapter or track. Press and hold to fast
forward (☞p.18).
CONTROLS AND FUNCTIONS
3 4 5
REP OFF S ALL A-B
@ A B
5
En