Warning: Please read the following instructions carefully before attempting to
assemble, operate or install the product. The charcoal kettle becomes extremely
hot and can cause burning. Failure to comply with these instructions may result in
serious bodily injury.
Note: Remove all packaging,including straps,before using the charcoal kettle.
How to use your charcoal kettle
Before light
Choose a proper location to grill
Only use this charcoal kettle in a well-ventilated area. Do not use in a garage, building,
breezeway, or any other enclosed area.
Keep the charcoal kettle on a secure, level surface at all times.
Do not use charcoal kettle within five feet of any combustible material. Combustible
materials include, but are not limited to, wood or treated wood decks, patios, and
porches.
Preparing the charcoal kettle for lighting
1. Remove the lid and position it on the side of your charcoal kettle using either the lid
hook located on the inside of the lid.
2. Remove the cooking (top) grate from your charcoal kettle.
3. Remove the charcoal (bottom) grate and clear ashes or chunks of old charcoal from the
bottom of the bowl. Charcoal requires oxygen to burn, so be sure that nothing clogs the
vents.
4. Release the ash catcher, then dispose of the ashes.
5. Open bowl vent by moving the handle to the open position.
6. Replace charcoal (bottom) grate.
Lighting Charcoal
1. Light the charcoal using newspaper or other paper.
2. Light the charcoal using lighter cubes.
Operating Instructions
17