Página 1
• To READ ALL the instructions completely before beginning. • To READ ALL warnings, care, and maintenance information. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
Si la reparación o su reemplazo no es práctico, Delta Faucet Company tiene DELTA FAUCET COMPANY NO SE HACE RESPONSABLE POR CUALQUIER DAÑO ESPECIAL, la opción de reembolsarle su dinero por la cantidad del precio de compra a cambio de la devolución...
RP40650 Set Screw Tornillo de Ajuste RP54973 Vis de calage Handle, Red/Blue Button & Set Screw RP54974 Manija, Botón Rojo/Azul Red/Blue Button y Tornillo de Ajuste Botón–Rojo/Azul Bouton–Rouge/Bleu Manette, Bouton Rouge/ Bleu et Vis de Calage RP54975 O-Ring RP54972 Anillo “O” Joint torique Casquillo RP54976...
Página 4
1 3/8" (35 mm) Diameter 7 1/2" (191 mm) Max. Slide single hole gasket (1) up over tubes and mounting stud. Position faucet (2) and gasket on sink. Option: If sink is Drill hole in finished deck per diagram. Hole location will vary uneven, use silicone under the gasket.
Página 5
Loop tubing (2) if it is too long. Note: Recommended leak-free joint to be created. Delta is not Tubing is cut too short: buy a coupling union responsible for tubing that is cut too short or cut and a replacement supply line that mate together tubing minimum bend diameter is 8".
Página 6
Correct method Incorrect Installation Método Correcto Instalación Incorrecta Bonne méthode Installation Incorrecte Do not install sleeve Ensure cut is straight. upside down. No instale la manga Asegúrese que el Custom Fit Connections - Plastic Sleeve Installation Instructions boca abajo. corte esté recto. 1.
Página 7
Grid Strainer Installation - Optional Remove aerator (1) using supplied wrench (2) and turn faucet handle (3) to Remove grid flange (1). Screw nut and washer (2) down as far as possible. Push the full on mixed position. Turn on hot and cold water supplies (4) and flush water lines for one minute.
Página 8
Setting The Handle Limit Stop (Optional) This faucet includes an integrated handle limit stop that has two this handle limit stop will not always prevent scalding because it positions. Position 1, to the left, allows full handle motion (the full range does not compensate for incoming pressure or sudden water temperature changes.