Tabla de contenido
Publicidad
Enlaces rápidos
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
Models/Modelos/Modèles
501LF-HDF, 511LF-HDF, 515LF-HDF,
516LF-HDF, 520LF-HDF & 523LF-HDF
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
1/8"
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant
de débuter;
• LIRE TOUS les avertissements ainsi que toutes
• Acheter le bon nécessaire de raccordement.
www.deltafaucet.com
73420
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
73420
SINGLE HANDLE LAVATORY
CENTERSET FAUCETS
LLAVES MONOCONTROL DE MONTURA
DE CENTRO PARA LAVAMANOS
ROBINETS À ENTRAXE COURT À
UNE POIGNÉE
1
T E FLO N
3/7/13 Rev. B
Publicidad
Tabla de contenido
Manuales relacionados para Delta 501LF-HDF Serie
Resumen de contenidos para Delta 501LF-HDF Serie
- Página 1 • To READ ALL warnings, care, and maintenance information. • To purchase the correct water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
-
Página 2: Cleaning And Care
Cette garantie s’applique seulement aux produits commerciaux des sociétés Delta Faucet preuve d’achat à notre usine, FRAIS DE TRANSPORT PRÉPAYÉS, à l’adresse indiquée. et Delta Faucet Canada et est nulle de plein droit pour tout dommage causé à ce robinet CETTE GARANTIE EST LA SEULE GARANTIE EXPRESSE FAITE PAR DELTA. - Página 3 RP5648 Stopper RP54687 Tapón Handle & Set Screw Bonde Manija y Tornillo de Ajuste RP12516 Manette et Vis de Calage RP152 Strap & Screw Set Screw Barra Chata y Tornillo Feuillard et Vis Tornillo de Ajuste Vis de Calage RP23060 Flange Reborde Collerette...
-
Página 4: Mantenimiento
Maintenance If faucet exhibits very low flow: If leak persists–SHUT OFF WATER SUPPLIES. * WARNING: Failure to securely tighten Replace valve cartridge (3). When reinstalling parts, bonnet nut with a wrench could result A. Remove and clean Aerator (1) with supplied wrench (2), or make sure bonnet nut (5) is tightened securely with in water damage. - Página 5 1/2" (12.70mm) IPS Supply Line Connections Position faucet (1) and gasket (2) on sink. Option: If sink is uneven, Note: Be careful when bending the copper tubing. Kinked tubes will use silicone under the gasket. void the warranty. Choose hook-ups for 1/2” I.P.S. connections: (1) Ball nose riser (3/8”...
- Página 6 Step 3b Metal Pop-Up Installation Step 3c Remove stopper (1) and flange (2). Apply silicone to underside of flange (1). Insert body Remove pivot nut (1). Install horizontal rod (2) into sink. Screw flange (1) into body (2). (2) and stopper (3) as removable (4) or non- Screw nut (1) all the way down.
- Página 7 Grid Strainer Installation Remove grid flange (1). Screw nut and washer (2) down as far as possible. Push gasket (3) down Remove aerator (1) using supplied wrench (2) and move to nut and washer. faucet handle (3) to the full on mixed position. Turn on hot and cold water supplies (4) and flush water lines for one Remove tailpiece (1) and apply plumber tape (2) to threads.
- Página 8 Setting The Handle Limit Stop (Optional) because it limits the amount of hot water in the mix; however, this handle limit stop This faucet includes an integrated handle limit stop that has two positions. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). will not always prevent scalding because it does not compensate for incoming pressure or sudden water temperature changes.