Table 1-2. LCD Status Messages (continued)
Line 1
Line 2
Message
Message
EB113
CHIPSET ERR
EFFF2
ROMB PRESENCE
I0000
BIB
SBE LOG DISABLED Single-bit error log disabled.
IB110
LOGGING DISABLED BIOS logging disabled.
IB110
IB10C
MEMORY SPARED
IB10C
MEMORY MIRRORED
IB10C
MEMORY RAID
IB10C
MEMORY ADDED
CARD #
IB10C
MEMORY REMOVED
IS000
INTRUSION
NOTE:
For the full name of an abbreviation or acronym used in this table, see the "Glossary"
in your User's Guide.
IRQ5 Availability
IRQ5 is available for use and is not pre-assigned to a remote access controller. See "IRQ Assignment
Conflicts" in your Installation and Troubleshooting Guide for a complete list of IRQ assignments.
12
Information Update
Causes
An error has occurred in the
chipset.
Integrated RAID controller is
activated.
BMC unable to read BIOS Initial
Block (BIB).
Memory spare bank enabled.
Memory mirroring enabled.
Memory RAID enabled.
Hot-plug memory added.
Hot-plug memory removed.
System cover has been removed.
Corrective Actions
See "Troubleshooting the
Microprocessors" in your
Installation and Troubleshooting
Guide. If the problem persists, see
"Troubleshooting Expansion
Cards" in your Installation
and Troubleshooting Guide. If the
problem still persists, see
"Getting Help" in your
Installation and Troubleshooting
Guide.
Information only.
See "Getting Help" in your
Installation and Troubleshooting
Guide.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only