Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 10
Lubricate threads inside
housing.
STEP 11
Thread housing onto valve
body.
STEP 12
Insert recharged desiccant canister
into lower housing. Lubricate and
replace all O-Rings with new
O-Rings provided. Stack desiccant
spring and purge plate on top of
canister and reassemble with
purge plate nut and new seal
washer. Lubricate seal washer.
Do not overtighten purge plate nut,
200 in-lbs maximum.
STEP 13
Be certain large thin
O-Ring is seated in
groove on housing.
STEP 14
Push lower housing
assembly with canister
up into cap assembly with
a twisting motion. Replace
V-Band coupling over
flanges and tighten nut to
35 in-lbs torque.
STEP 15
Reconnect purge control
line and heater wires.
Kit
QTY.
Contents
1
1
1
1
1
1
1
1
1
1
1
North American Sales Division
Haldex Brake Products Corp.
10707 NW Airworld Drive
Kansas City, MO 64153-1215
(800) 643-2374 -- (816) 891-2470
Fax: (816) 801-4198
Rev. 8/02 500 ART L31137
DESCRIPTION
O-Ring (Shaft Assembly)
O-Ring (Purge Valve)
O-Ring (Housing)
O-Ring (Purge Plate Check)
O-Ring (Purge Plate)
U-Cup
Seal Washer
Spring
Spring
Valve
O-Ring (Cartridge)
North American Sales Division
Haldex Limited
525 Southgate Drive, Unit 1
Guelph, Ontario Canada N1G 3W6
(800) 267-9247 -- (519) 826-7723
Fax: (519) 826-9497
www.hbsna.com
Publicidad
