Locked Cable Function (Model With Socket) - VESTEL EVC04 Serie Guia De Instalacion

2.6.3 - LOCKED CABLE FUNCTION (Model with Socket)

The cable becomes locked and your socket model charging station starts behaving as a cable
model.
1- Turn off the power of your charging station.
3- To enable locked cable function, toggle DIP switch
pin 3 to ON position using pointed spudger or a
plastic pointed tool. The DIP switch location is as
shown in below figure.
1
SW1
5- Open the front cover of the socket outlet and plug
the charging cable to the socket outlet.
IG v7.3.0 2020
Enabled
ON
1 2 3 4 5 6
Disabled
SW1
© 2020 Vestel - All rights reserved
2- Open the product cover as described in the
installation manual.
4- Close the product cover as described in the
installation manual.
6- Turn on the power to your charging station. The
cable becomes locked and the charging station starts
behaving as a cable model.
Table-11
English - 28