VESTEL EVC04 Serie Guia De Instalacion página 42

4.5 - CHANGE GENERAL SETTINGS OF THE DEVICE
Display Language
You can select HMI display language from the general settings page.
Available languages are English and Turkish for now.You can save your selection with "Save Button".
4.6 - CHANGE OCPP SETTINGS OF THE DEVICE
OCPP Connection
If you select mode as "Enabled"; you should type all fields in the connection settings and
configuration parameters sections are enable in the below.
For now, the only available OCPP version is OCPP 1.6, so it will be selected as default.
The Central System Address and Charge Point Id are mandotary fields for saving this page.
IG v7.3.0 2020
Figure.36
Figure.37
© 2020 Vestel - All rights reserved English - 41