Osram AirZing PRO 5030 UNIV Manual De Instalación Y Seguridad página 3

AirZing™ PRO 5030 UNIV
WARNING
!
UV-C
— This product must be installed in accordance with the applicable installation code by a person
familiar with the construction and operation of the product and the hazards involved.
— Disconnect power before installation and verify that power is off before working on the fixture.
— To avoid electrical shock, do not disassemble product.
— This product is intended for indoor dry locations. Not for use where exposed directly to the
weather or water.
— If the lamp or fixture exhibits undesirable operation (buzzing, flickering, etc.), immediately turn
off power, remove lamp from the fixture and contact your service technician.
— This product shall not be used in places where there are flammable and/or explosive materials
present.
UV-C RISK GROUP 3
WARNING UV-C emitted from this product.
Avoid eye and skin exposure to unshielded product.
UV-C
This product emits UV-C light during operation. Exposure to UV-C light can cause injury to the eyes
and skin. To prevent possible injury, eyes and skin should not be exposed to direct or reflected
ultraviolet light emitted by this lamp. This lamp is in Risk Group 3 per IEC 62471-2. Adequate
protection can be provided by clothing, gloves, opaque materials, UV-C blocking eyewear and
ordinary window glass.
The installation needs to be done
by a licensed electrician.
The maintenance needs to be done
by a qualified service technician.
3
RISK OF FIRE OR ELECTRICAL SHOCK
Avoid direct or reflected UV-C light
exposure to eyes or skin of humans
and animals.
OSRAM HNS lamps contains mercury.
Follow local regulations when disposing
of used lamps.
This product is not used for any general
lighting application.