Teka HPL-830 Guía Rápida De Uso página 29

3172492-003 EPIFA.QXD 14/02/14 10:12 Página 29
INCIDENT
The control dial is in position
and the door is still locked.
The control dial is in position
, the oven is cold and the
door is still locked.
I have turned the control dial
to position . The pilot light
is lit up, the P symbol is
flashing on the timer display
and there is a beep every 5
seconds.
CAUSE
The oven has not cooled down
to the safe temperature.
You have not followed the
instructions to cancel the
operation correctly.
You have not selected one of
the programmes (P1, P2 or
P3).
SOLUTION
Wait until the temperature
lowers and pilot light
off.
1. Turn the control dial to
position and wait for 1
minute.
2. Turn the control dial to
position and wait for 1
minute.
3. Turn the control dial to
position again and wait
until pilot light turns off.
Press + or – to choose one of
the programmes (P1, P2 or P3)
to start the pyrolytic cycle.
turns
29