Sytech Easy Talk Serie Manual De Instrucciones página 6

NOTE: Press the [DEL] key for 3 seconds for deleting all the outgoing calls.
SETTING MENU
SETTING DATE AND TIME
1. In on-hook state, press the [SET] key. The LCD will display SET 1 DATE
2. Press the [SET] key for the last two digits of year to flash.
3. Press [▲] or [▼] key to edit the year and then press the [SET] key to confirm. Use the same method to set
the month, date, hour and minute.
The unit will save the settings and quit after 12 seconds.
NOTE:
Scope: Month: 1-12 Date: 1-31 Hour:00-23 Minute:00-59
SETTING LOCAL AREA CODE
1. In on-hook state, press the [SET] key and then press the [▲] key. The LCD will display SET 2 CODE
2. Press the [SET] key again. The LCD will display CODE- - - - -
3. Press the [▲] or [▼] keys to set the first digit of the local area code;
4. Press the [SET] key to confirm and enter the second digit setting. Use the same method to set the last 4
digits.
5. The unit will save the settings and quit after 12 seconds.
NOTE: If the local area code contains only 4 digits, the last digit can be left as "-".
After having set the local area code, the unit will auto-filter the area code when incoming calls are received.
SETTING PABX CODE
1. In on hook state, press the [SET] key
2. Press the [▲] key twice. The LCD will display SET 3 PCODE.
3. Press the [SET] key to confirm. The LCD will display PCODE--
4. The first "-" flashes and indicates to set the first code.
5. Press [▲] or [▼] key to set the first code, and then press the [SET] key to confirm and to advance to the
next one.
6. The unit will save the settings and quit after 12 seconds.
NOTE:
If the PABX code contains only one digit, the second digit can be left as"-".
When the PABX code is set, the unit will automatically add the PABX code when dialing back incoming calls
containing more than 6 digits.
SETTING AUTO IP
This function is not available for European countries, please keep it as default and do not set it.
SETTING DIALING MODE
At on hook state, press [SET] key
1
Press [▲] key four times, LCD displays SET 5 P-T
2
Press [SET] to confirm, LCD displays TONE
3
Press [▲] or [▼] key to select PULSE or TONE
4
Press [SET] to confirm.
5
6 Unit will save and quit after 12 seconds.
6