Sytech Easy Talk Serie Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FLASH AND PAUSE FUNCTION
The flash time is 100ms. The flash function is available and will work in PABX.
Press the [PAUSE] key to insert a 3.6s pause interval.
HOLD MUSIC FUNCTION
During a conversation, press the [HOLD] key to enter the hold mode. Hold music will be heard.
In hold mode:
Press the [HOLD] key to release the hold mode and continue to talk over the handset.
SETTING THE HANDSET VOLUME
Pick up the handset and press the [VOL] key to adjust the handset volume to High or Low.
SETTING UP THE RINGING VOLUME
The SY-1481 includes two levels for the volume ring control: HI & LO can be selected. If you wish to adjust to
Low, switch the ring button located at the bottom of the unit to LO position. The HI level will increase your
telephone ring bell.
SETTING THE LCD CONTRAST
In off-hook state, press the [BRI] key continuously to adjust the LCD contrast. You can chose up to 5 different
levels contrast.
LCD BACKLIGHT FUNCTION
The backlight is turned on when receiving an incoming call, dialing, pressing any key or in MUSIC HOLD mode.
The backlight will turn off automatically when the telephone is left idle for 6 seconds.
Note: If batteries are not loaded or discharged, the backlight LCD display function will not work.
WALL MOUNTABLE
The SY-1481 telephone can be used as wall mounted or as desktop
NOTES
Please unplug the telephone line when installing or replacing new batteries.
MAINTENANCE
The unit must be placed in a dry and clean place to avoid the damage of the inner parts.
Use a damp cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.
If the unit has troubleshooting, do not disassemble this product. Please contact Sytech Hotline Service Center
for any repair or exchange of the product.
7

Publicidad

Tabla de contenido
loading

Productos relacionados para Sytech Easy Talk Serie

Este manual también es adecuado para:

Sy-1481

Tabla de contenido