Safety Instructions; Electrical Connection - AEG MSB2548C-M Manual De Instrucciones

Ocultar thumbs Ver también para MSB2548C-M:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 96
24
www.aeg.com
Eggs in their shell and whole hard-boiled eggs should
not be heated in the appliance since they may
explode, even after microwave heating has ended.
The appliance should be cleaned regularly and any
food deposits removed.
Failure to maintain the appliance in a clean condition
could lead to deterioration of the surface that could
adversely affect the life of the appliance and possibly
result in a hazardous situation.
The temperature of accessible surfaces may be high
when the appliance is operating.
The microwave oven shall not be placed in a cabinet
unless it has been tested in a cabinet.
The rear surface of appliances shall be placed against
a wall.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
Pay attention to the minimum dimensions of the
cabinet (if applicable). Refer to the installation
chapter.
The appliance must be operated with the decorative
door open (if applicable).

2. SAFETY INSTRUCTIONS

2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Obey the installation instruction
supplied with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not pull the appliance by the
handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is
installed below and adjacent safe
structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.

2.2 Electrical Connection

WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical
information on the rating plate agrees

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido