Let's get started
Before using your phone, please read the legal,
safety, and regulatory information provided with your
product.
Depth
Camera
Flash
Proximity
Sensor
Front
Camera
SIM &
microSD
Card Tray
read me
léeme
en-US | es-US
Microphone
Put in the cards & power on
Nano SIM
Main
Camera
Macro
Camera
Headset
Jack
Volume
Buttons
Power Button/
Fingerprint
Sensor
Press:
display on/o .
Press and hold:
phone on/o .
Tap:
unlock with
fingerprint
sensor.
Speaker
USB-C/Charger
*microSD card is optional, sold separately.
Help & more
Get answers, updates, and info:
• Help is here: From the home screen, swipe up and tap Settings > Help
1 Insert the SIM tool into
to learn how to use your phone and get support.
the tray hole to pop out
• Get more: Get software, user guides, and more at
the tray.
www.motorola.com/mymotog.
• Get apps: Tap Play Store to browse and download apps.
Make sure you use the
Legal information. This guide provides important legal, safety, and
regulatory information that you should read before using your product. For
correct size SIM card
the complete legal information, from the home screen swipe up and tap
and don't cut the SIM
Settings >
, then type Legal information, or visit
www.motorola.com/device-legal.
card.
Water repellent. Your phone is not waterproof. For more about your phone's
water-repellent design and care, swipe up and tap Settings > Help.
Battery safety. To prevent possible burning and injury, the battery in your
phone should only be removed by a Motorola-approved service center or
similar skilled personnel.
2 Insert the SIM card with
If your phone becomes unresponsive, press and hold the Power button until
the gold contacts down,
the screen goes dark and your phone restarts. Charge your phone using a
compatible Motorola charger. Use of other chargers is not recommended.
then gently push the
Don't charge your phone in temperatures below -20°C (-4°F) or above 45°C
tray into the slot.
(113°F). For more, see the "Legal information" section of this guide, or visit
www.motorola.com/device-legal.
Add a microSD card for
Warning about high volume usage. To prevent possible hearing
additional storage.*
damage, do not listen at high volume levels for long periods. When
your headset volume reaches the high volume threshold, a warning
shows. Tap OK to dismiss it, or wait one to five seconds, then press
the Volume Up button to dismiss the alert and enable the volume to
continue to be adjusted.
Disposal & recycling. For help recycling products and packaging
responsibly, visit www.motorola.com/recycling.
Class 1 Laser. This device is classified as a
3 Press and hold the
Class 1 Laser product, which is safe in normal use per
Power button, then
IEC60825-1:2007 and IEC60825-1:2014. This device
complies with 21 CFR 1040.10 and 1040.11, except for
follow the prompts to
deviations pursuant to Laser Notice 50, dated June 24, 2007. Do not attempt
get started.
to modify or disassemble.
Extreme heat or cold. Don't use your phone in temperatures below
-20°C (-4°F) or above 45°C (113°F). Don't store/transport your phone in
temperatures below -20°C (-4°F) or above 60°C (140°F).
Legal disclaimers. Features, services and applications are network
dependent and may not be available in all areas; additional terms/charges
may apply. Product specifications and other information contained in this
guide are believed to be accurate at the time of printing. Motorola reserves
the right to correct or change any information without notice.
Arbitration. Your purchase is governed by a binding arbitration clause. For
more information and how to opt-out, see the legal guide that came with
your phone.
Copyright & trademarks. MOTOROLA, the stylized M logo, MOTO, and
the MOTO family of marks are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC. Google, Android, Google Play and other
related marks and logos are trademarks of Google LLC. microSD Logo is
a trademark of SD-3C, LLC. All other product or service names are the
property of their respective owners.
© 2020 Motorola Mobility LLC. All rights reserved.
Product ID: moto g power (Model XT2117-4)
Manual Number: HQ60722237000-A
CLASS 1 LASER PRODUCT