BGS technic 2809 Manual Del Usuario página 4

USE
Follow the locking direction at the bottom of safety locking
know, and turn counterclockwise to unlock.
Rotate the adjusting ring to set up required torque.
You can see the numbers through convex lens.
Do not rotate the torque below 'STOP' or beyond the max
torque.
After rotating to demand torque, turn the safety locking knob
clockwise to lock the torque.
Make sure the white point on knob is aligned with the white
point on handle.
Operate the torque wrench correctly after setting torque.
Apply force in the middle of the handle, and notice audible
'click" sound to make sure you reach the torque.
Always turn the torque wrench to the lowest torque value after
use.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed