Publicidad
Idiomas disponibles
Idiomas disponibles
ALX172 and ND172 Double Dummy Lever
Tools required
Pin wrench
(included)
Installation Preparation
Door preparation:
For door preparation use the template included in the package with the
lock. For additional information, visit the website
www.allegion.com/us.
1
Install outside and inside housing assemblies.
1a
Install the outside housing assembly.
1b
Then, install the inside housing assembly and secure
with two mounting screws.
Mounting
screws
Inside
b
housing
2
Install outside rose.
Align dimple
and groove.
ALX172, ND172
Lever
Rose
Mounting screws (2)
Inside
housing
3
Firmly push on until lever catch engages.
4
Outside
a
housing
Repeat steps 2 and 3 for the inside rose and lever.
5
Rotate rose
until it stops.
Outside
housing
Rose
Install outside lever.
Lever
catch
Install inside rose and lever.
If using, install the optional blank latch plate.
1Z\," x 2Z\v" x B\cx"
(29 x 57 x 4 mm)
Metal: Drill and tap for #8-32
Wood: Z\," (3 mm) pilot
Customer Service
1-877-671-7011
Installation Instructions
Optional Blank Latch Plate Kit
Blank
latch
plate
Screws (2)
Part # 47269199
Lever
us.allegion.com
2
Publicidad
