Assembly Of The Accessories - Mopedia RC325 Serie Manual De Instrucciones

12

15.1 Assembly of the accessories

RCA115 Depth-adjustable leg divider (LOT < 05/2017)
Remove the WC pan from the seat and remove the seat.
Extract the black plugs from the holes in the horizontal tube and insert the specific screws.
Insert the saddle washers from the other part of the tube and insert the chrome-plated plate
with the clamp. Tighten everything using the nuts. Choose the desired depth and fix in place
with the knob.
RCA316 Depth-adjustable leg divider (LOT >05/2017)
nuts.
Insert the leg divider and choose the desired depth, then fix in place with the knob.
RCA330 Chest padded supports
RCA310 Height-adjustable headrest
RCA111 Height-adjustable and depth-adjustable ergonomic head-
rest
AS shown in the figures, commode chairs with lot number
04/2017 and higher have inserts in the backrest. Place your hand
at the centre of the backrest and identify the four inserts.
Use a cutter or a screwdriver to remove the synthetic leather
material, insert the headrest attachment plate and fix it in place
with the screws provided.
Remove the blue backrest and the black plugs on the backrest
tube.
Insert the screws into the square holes on the backrest frame.
Insert the saddle washers by placing them on the tube.
Insert the chrome-plated plate, complete with the clamp.
Tighten everything using the nuts.
Install the left-hand chest padded support as shown in the
photo and use the knob to adjust it to the desired height.
Install the chest padded support on the right side as well.
Remove the WC pan from the seat
and remove the seat.
Extract the black plugs from the
holes in the horizontal tube and
place the leg divider support on the
tubes. Insert the screws provided
and insert the saddle washers
from the other part of the tube,
then tighten everything using the