Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Service
▶ Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
2.2
Belt sander and drum sander safety warnings
▶ Hold the power tool by insulated gripping surfaces, because the sanding surface may contact its
own cord. Cutting a "live" wire may make exposed metal parts of the power tool "live" and could give
the operator an electric shock.
2.3
Additional safety instructions
▶ Use the power tool only when it is in perfect working order.
▶ Never tamper with or modify the power tool in any way.
▶ The power tool is not intended for use by persons who have received no special training. Keep the power
tool out of reach of children.
▶ Always hold the power tool firmly with both hands on the grips provided. Keep the grips dry, clean and
free from oil and grease.
▶ After installing the backing pad, always install the screw cap.
▶ Check the power tool, the backing pad, the supply cord and the connections at regular intervals for wear.
▶ Check the power tool's supply cord at regular intervals and have it replaced by a qualified specialist if
found to be damaged.
▶ Check extension cords at regular intervals and replace them if found to be damaged. Do not touch the
supply cord or extension cord if it is damaged while working. Unplug the supply cord from the power
outlet.
▶ In the event of an interruption in the electricity supply, switch the power tool off and unplug it from the
power outlet to prevent an unwanted restart when power is restored.
3
Description
3.1
Product overview
3.2
Intended use
The product is a hand-held, electrically powered random orbital sander. It is suitable for dry-sanding wood,
wood-based materials, composites, varnishes, paints, plastics, plaster and filler compounds with wearing,
replaceable sanding pads.
3.3
Possible misuse
•
This product is not suitable for working on hazardous materials.
•
This product is not suitable for working in a damp environment and use of the product for wet sanding is
prohibited.
4
English
1
Sanding head
@
Extractor
;
Grip surfaces
=
Control panel
%
Power cord socket
&
Hose connector
(
Backing pad
)
Multi-purpose LED
+
On/off button
§
Speed indicator
/
Increase/reduce speed
:
Start/stop button
∙
2301587
*2301587*
Publicidad
Tabla de contenido
