Tabla de contenido
Publicidad
ENGLISH
PARTS
1. On/off switch
2. Detachable blade set
3. No.1-8 professional grade guide combs
(3-25mm). No. 0 length comb (1.5mm)
4. Left and Right ear taper combs
5. Charging indicator
6. Low battery indicator
GETTING STARTED
CHARGING YOUR APPLIANCE
•
Before using your hairclipper for the first time, charge for 4 hours.
•
Ensure the product is switched off.
•
Connect the charging adaptor to the product and then to the mains.
•
When charging, the charge indicator will blink. When fully charged the indicator will
stay on.
•
Your clipper cannot be overcharged. However, if the product is not going to be used for
an extended period of time (2-3 months), unplug it from the mains and store.
•
Fully recharge your hairclipper when you would like to use it again.
•
To preserve the life of your batteries, let them run out every 6 months then recharge for
4 hours.
•
Typically your clipper will require 4 hours to fully recharge.
CHARGING VIA STANDARD ELECTRICAL SOCKET
•
Ensure the product is switched off.
•
Connect the charging adaptor to the product and then to the mains.
•
When charging, the charge indicator will blink. When fully charged the indicator will
stay on.
•
Allow 4 hours for a full charge.
CORDED USE
•
Connect the charging adaptor to the product then to the mains.
•
When the cord is connected to the mains, the charging indicator light will turn off if the
product is turned on.
CAUTION Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
•
When the unit is switched on and fully charged, the product can be used in cordless
mode for up to 120 minutes.
4
7. Push release point to slide off blade
8. Oil
9. Cleaning brush
10. Blade guard
11. Storage case (not shown)
12. Adaptor (not shown)
Publicidad
Tabla de contenido
