Pur Line MISTY 2 Manual Del Usuario página 8

COMPONENTS
Before installation, please check that all parts have been supplied
1. Grid joint
2. Mist vent
3. Front grid
4. Blade spinner
5. Blades
6. Grid nut
7. Rear grid
8. Motor spindle
9. Head
10. Flexible hose
11. Screw
12. Main body
13. Base
14. Body nut
15. Casters
ASSEMBLY
BASE / BODY
1. Fix the casters (15) with the screws to the base (13).
2. Remove the body nut (14) from the main body (12)
3. Insert the main body (12) into the base (13) and attach them with the body nut (14)
FAN HEAD
1. Put the fan head (9) into the main body (12) and fix them with the screw (11).
FAN BLADE AND SAFETY GRID
1. Put the rear grid (7) in the fan head (9) and fix it with the grid nut (6).
2. Put the blade (5) into the motor spindle (8).
3. Fix the blade by gently hand tightening the blade spinner (4).
4. Put the grid joint (1) in the front grid (3) with the mist vent (2).
5. Place the front grid (3) and secure the grids (3,7) screwing the grid joint (1).
Note: Do not operate without fan grills and blade properly in place.
FILLING THE WATER TANK
Unplug the appliance before filling and cleaning.
1. Remove the water tank.
2. Unscrew the water tank cap.
3. Fill with fresh clean water.
4. Refit the water tank cap. Important: Ensure the tank cap is fully rotated and locked in place.
5. Place the water tank back into the device
3
2
1
EN
6
5
4
7
8
7
10
12
9
11
13
14
15