Wiring; Specifications - Franklin Electric LittleGIANT 6EC-CIA-SFS Guia De Instalacion

WIRING

W A R N I N G
s
WARNING
!
building codes before installation. The installation must be in
accordance with their regulations as well as the most recent
National Electrical Code (NEC).
Check the pump label for proper voltage required. Do not connect to
voltage other than that shown.
A ground fault circuit interrupter (GFCI) is required.
The pump should be connected or wired to its own circuit with
no other outlets or equipment in the circuit line. The fuses and
circuit breaker should be of ample capacity in the electrical circuit.
See table below:
Pump HP
6EC 1/3
10EC 1/2
s
WARNING
!
mounted to the pump must not be modified in any way, with the
exception of shortening the cord to fit into a control panel. Any splice
between the pump and the control panel must be made within a
junction box and mounted outside of the basin, and comply with
the National Electrical Code. Do not use the power cord for lifting
WHITE
the pump.
RED
W A R N I N G
Check local electrical and
Voltage Breaker Amps
115 V 15
115 V 15
The flexible jacketed cord assembly
WHITE
BLUE
CAP
WHITE
GREEN
MANUAL

SPECIFICATIONS

5'
1.5 m
53
6EC
201
67
10EC
254
WHITE
RED
WHITE
BLACK
RED
6EC/10EC SERIES
Gallons Per Minute, at Height
Liters Per Minute, at Height
10' 15' 20'
3 m 4.5 m 6.1 m 9.1 m
50 42 34
189 159 129
57 47 42
216 178 159
WHITE
BLUE
CAP
WHITE
GREEN
MANUAL
MANUAL
WHITE
BLUE
CAP
SWITCH
BLACK
WHITE
GREEN
AUTOMATIC
AUTOMATIC
Shut-Off
30'
28'
-
8.5 m
24 36'
91 11 m
BLACK
R
6EC/10EC SERIES
7