General Power Tool Safety Warnings - Lista CBE250L Traducción De Las Instrucciones Originales

And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES:
Safety guard
We recommend that you purchase your accessories from the same store that sold you the tool. Use
good quality accessories marked with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for further details. Store personnel
can assist you and offer advice.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! When using the machine the safety rules must be followed. For your own safety
and bystanders please read these instructions before operating the machine. Please keep the
instructions safe for later use.
SAVE THESE INSTRUCTIONS
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Safety Warnings for lawn trimmer
a) Wear protective glasses or goggles;
b) Never allow children or people unfamiliar with the instructions to use the machine;
c) Stop using the machine while people, especially children, or pets are nearby;
d) Only use the machine in daylight or good artificial light;
e) Before using the machine and after any impact, check for signs of wear or damage and repair as
necessary;
f) Never operate the machine with damaged guards or without the guards in place;
g) Keep hands and feet away from the cutting means at all times and especially
When switching on the motor;
h) Take care against injury from any device fitted for trimming the filament line length. After extending
new cutter line always return the machine to its normal operating position before switching on;
i) Never fit metal cutting elements;
C or less
0
1
23