Hamilton Beach 31230 Manual Del Usuario página 11

840180401 ENv03.qxd:Layout 1
How to Use the Probe
OVEN TIME OVEN TEMP DESIRED TEMP ACTUAL TEMP
CHOOSE MODE TO START
TOAST BROIL PROBE
BAKE CONV. WARM
1
Press PROBE button. The LED display will
read "350F" or the last temperature
selected in the Probe mode. NOTE: 350°F
is the default temperature. After first use,
the last temperature selected will be the
default.
Temperature chart is located on the glass door of the toaster oven.
2/12/10 5:11 PM Page 11
w WARNING
BAKE CONV. WARM
BAKE
TEMP TIMER
ENTER
TEMP
STOP
START
ENTER
START
2
Press the up/down buttons if a different
temperature is desired (between 200°F
and 450°F). Once a temperature is
selected, press ENTER/START.
Fire Hazard.
• If contents ignite, do not open oven
door. Unplug oven and allow contents
to stop burning and cool before opening
door.
CONV.
OVEN TIME OVEN TEMP DESIRED TEMP ACTUAL TEMP
CHOOSE MODE TO START
3
TOAST BROIL PROBE
The oven will then prompt you to set
the desired probe temperature. The LED
display will flash "160F."
NOTE: 160°F is the default probe temper-
ature. After first use, the last temperature
selected will be the default.
NOTES:
• Cook beef and pork to at least 160°F (71°C).
• Cook chicken to at least 165°F (74°C).
• Cook fish until at least 145°F (63°C) or until opaque or flakes with a fork.
• Visit foodsafety.gov for more safe cooking temperature information.
• In broil mode, the probe can be used to measure temperature by pressing the
PROBE button. The temperature will display for 5 seconds.
• The "Bake" rack position should be used for a potato. A good-sized baking
potato will be about the size of a large fist. Insert the probe into the center of
the potato and bake until internal temperature reaches 210°F.
• Do not use oven cooking bags.
• Always allow at least 1 inch between
food and heating element.
• Always unplug toaster oven when not
in use.
BAKE CONV. WARM
BAKE CONV.
TEMP TIMER
ENTER
TEMP
STOP
START
ENTER
START
4
Press the up/down buttons if a different
temperature is desired (choose between
140°F to 210°F); then press ENTER/START
button. The LED display will read
"PRE HEAT" to let you know the unit
is heating. When the desired oven
temperature is reached, the LED display
will read "LOAD FOOD."
11