Publicidad
Idiomas disponibles
Idiomas disponibles
LOOSEN towers
by lifting lever
and turning.
Snap on End Cap.
•Push tower
onto
factory
side rail.
• Slide crossbar
into tower.
NOTE: If bar will not move
easily, lift free end of bar
into the air slightly.
DO NOT INSTALL TOWER directly over
factory crossbar.
You may need to move the factory crossbar if there is
any interference with the towers.
• Position tower
on opposite
factory rail.
• Slide crossbar
into tower.
•Snap on
End Cap.
Secure tower loosely so
that bar can still rotate.
Publicidad
