Electrical Shock Hazard; Cleaning The Electric Kettle; Descaling The Electric Kettle - KitchenAid 5KEK1565 Manual De Instrucciones

USING THE ELECTRIC KETTLE
OPERATING THE ELECTRIC KETTLE
Before using your Electric Kettle for the first time, wash the Kettle and lid in hot, soapy water,
then rinse with clean water and dry. Fill the Electric Kettle with water to the MAX fill line; boil
the water and then discard. To avoid damage, do not fully immerse the Electric Kettle in water,
and do not use abrasive cleaners or scouring pads.
1
NOTE: Water must be at or above the MIN fill line for the Electric Kettle to operate. Do not
exceed the MAX fill line.
2
Plug into an earthed outlet.
Do not remove an earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, re,
or electrical shock.
3
4
12 | USING THE ELECTRIC KETTLE
W11222482 - New Final Copy.indb 12
Open the lid of the Electric Kettle by pressing the lid
release button, then fill the Electric Kettle with clean,
cold water
Push the lid down so that it is completely closed.
WARNING

Electrical Shock Hazard

Place the Electric Kettle on the base, and plug the
power cord into an earthed outlet.
Flip the on/off switch down; the On indicator will light
and the Electric Kettle will begin heating the water.
25/06/2018 20:56:08